The right tool for tool building

Tool building and setup require a high degree of accuracy and repeatability.

Meet high manufacturing standards

Meet high manufacturing standards

Tool building and injection molding within the automotive, aerospace, and shipbuilding industries require a high degree of accuracy and repeatability. FARO’s laser trackers and measuring arms are portable CMMs which can perform full volumetric accuracy tests on tools and molds to ensure the parts are being manufactured to the highest standard.

Identify problems early and report

Identify problems early and report

Over time, tools and molds may trend away from their original specifications. With FARO’s 3D metrology instruments, tool makers can identify or predict defects by evaluating the dimensional integrity and repeatability of tools and molds. Reports of the measurement results depict trends in accuracy so that tools and molds can be maintained or repaired as needed.

Application Video: Tool Building & Setup

With FARO’s 3D metrology instruments, tool makers can measure, analyze and identify potential issues in the dimensional integrity of their tools and molds early to ensure parts are always produced accurately to meet high manufacturing standard requirements.

+ Accurate and repeatable
Meet high manufacturing standards

Meet high manufacturing standards

Tool building and injection molding within the automotive, aerospace, and shipbuilding industries require a high degree of accuracy and repeatability. FARO’s laser trackers and measuring arms are portable CMMs which can perform full volumetric accuracy tests on tools and molds to ensure the parts are being manufactured to the highest standard.

+ Predict and report
Identify problems early and report

Identify problems early and report

Over time, tools and molds may trend away from their original specifications. With FARO’s 3D metrology instruments, tool makers can identify or predict defects by evaluating the dimensional integrity and repeatability of tools and molds. Reports of the measurement results depict trends in accuracy so that tools and molds can be maintained or repaired as needed.

+ Video

Application Video: Tool Building & Setup

With FARO’s 3D metrology instruments, tool makers can measure, analyze and identify potential issues in the dimensional integrity of their tools and molds early to ensure parts are always produced accurately to meet high manufacturing standard requirements.

For all your Factory Metrology needs

FaroArm®

FARO offers the world’s best-selling measurement arm

The FaroArm is a portable CMM that allows manufacturers easy verification of product quality by performing 3D inspections, tool certifications, CAD comparison, dimensional analysis and more. The FARO Edge is the most advanced, state-of-the-art FaroArm ever produced.

  • 1.8m to 3.7m (6 ft. to 12 ft.) spherical working volume
  • Repeatability from 0.024mm (0.0009 in.) to 0.064mm (0.0025in.)
  • Built-in touchscreen computer for laptop-free basic measurements
  • Smart Sensor Technology – Warn against excessive loads, correct for thermal variations, detect setup problems

download_pdf

FARO Edge

FARO ScanArm®

FARO provides a competitive all-in-one metrology solution with the ScanArm

The FARO ScanArm combines all of the advantages of the FaroArm with a hand held laser scanner (Laser Line Probe) and is the perfect contact/non-contact measurement system. Unlike other scanning systems, the ScanArm’s hard probe and the Laser Line Probe can digitize interchangeably without having to remove either component. Users can accurately measure prismatic features with the hard probe, then laser scan sections requiring larger volumes of data — all in one simple tool.

  • Scan rate – 280 frames/sec, 280fps x 2,000 points/line = 560,000 points/sec
  • High Dynamic Range Mode and advanced software algorithms to scan challenging materials
  • LED Rangefinder functionality which provides real-time scanning feedback
  • Blue laser technology delivers improved scanning results with higher resolution

download_pdf

FARO ScanArm

FARO Cobalt Array Imager

Unlimited Multi-Imager Scanning Configurations

The FARO Cobalt Array Imager is a metrology-grade non-contact scanner which captures millions of high-resolution 3D coordinate measurements in seconds. It is equipped with dedicated on-board processors and a smart sensor that allows multi-array configurations.

  • 5MP model – for most applications
  • 9MP model – improves resolution and the ability to capture features on edges and surfaces
  • Interchangeable lens with 250mm and 500mm field of view
  • Accuracy up to 0.027mm for 250mm lens and 0.050mm for 500mm lens

download_pdf

FARO Cobalt Array Imager

FARO Laser Tracker

Advanced, accurate, versatile and portable laser trackers

The FARO VantageS and VantageE Laser Trackers are high-performance, high-value Laser Trackers which maximize productivity and reduce inspection cycle times by up to 75% . These Laser Trackers set the standard in workflow productivity management for large-scale metrology applications by offering mobile device control, exceptional portability, battery operation, ruggedness, and high accuracy.

  • VantageS: 160m (525 ft.) spherical working volume
  • VantageE: 50m (164 ft.) spherical working volume
  • Accuracy up to 0.015mm (0.0006 in.)* [*Typical angle measurement performance at 2m]
  • Hot swappable batteries that eliminate the need for AC power and cabling

download_pdf

FARO Laser Tracker Vantage
+ FaroArm

FaroArm®

FARO offers the world’s best-selling measurement arm

The FaroArm is a portable CMM that allows manufacturers easy verification of product quality by performing 3D inspections, tool certifications, CAD comparison, dimensional analysis and more. The FARO Edge is the most advanced, state-of-the-art FaroArm ever produced.

  • 1.8m to 3.7m (6 ft. to 12 ft.) spherical working volume
  • Repeatability from 0.024mm (0.0009 in.) to 0.064mm (0.0025in.)
  • Built-in touchscreen computer for laptop-free basic measurements
  • Smart Sensor Technology – Warn against excessive loads, correct for thermal variations, detect setup problems

download_pdf

FARO Edge
+ ScanArm

FARO ScanArm®

FARO provides a competitive all-in-one metrology solution with the ScanArm

The FARO ScanArm combines all of the advantages of the FaroArm with a hand held laser scanner (Laser Line Probe) and is the perfect contact/non-contact measurement system. Unlike other scanning systems, the ScanArm’s hard probe and the Laser Line Probe can digitize interchangeably without having to remove either component. Users can accurately measure prismatic features with the hard probe, then laser scan sections requiring larger volumes of data — all in one simple tool.

  • Scan rate – 280 frames/sec, 280fps x 2,000 points/line = 560,000 points/sec
  • High Dynamic Range Mode and advanced software algorithms to scan challenging materials
  • LED Rangefinder functionality which provides real-time scanning feedback
  • Blue laser technology delivers improved scanning results with higher resolution

download_pdf

FARO ScanArm
+ Cobalt

FARO Cobalt Array Imager

Unlimited Multi-Imager Scanning Configurations

The FARO Cobalt Array Imager is a metrology-grade non-contact scanner which captures millions of high-resolution 3D coordinate measurements in seconds. It is equipped with dedicated on-board processors and a smart sensor that allows multi-array configurations.

  • 5MP model – for most applications
  • 9MP model – improves resolution and the ability to capture features on edges and surfaces
  • Interchangeable lens with 250mm and 500mm field of view
  • Accuracy up to 0.027mm for 250mm lens and 0.050mm for 500mm lens

download_pdf

FARO Cobalt Array Imager
+ Laser Tracker

FARO Laser Tracker

Advanced, accurate, versatile and portable laser trackers

The FARO VantageS and VantageE Laser Trackers are high-performance, high-value Laser Trackers which maximize productivity and reduce inspection cycle times by up to 75% . These Laser Trackers set the standard in workflow productivity management for large-scale metrology applications by offering mobile device control, exceptional portability, battery operation, ruggedness, and high accuracy.

  • VantageS: 160m (525 ft.) spherical working volume
  • VantageE: 50m (164 ft.) spherical working volume
  • Accuracy up to 0.015mm (0.0006 in.)* [*Typical angle measurement performance at 2m]
  • Hot swappable batteries that eliminate the need for AC power and cabling

download_pdf

FARO Laser Tracker Vantage
FARO CAM2 Measure 10 Software

FARO CAM2® Measure 10

Your complete 3D measurement software

FARO CAM2 Measure 10 is a metrology software suite designed for users who are seeking powerful solutions that enable fast and efficient 3D measurement with unbeatable simplicity.

  • Geometric Dimensioning and Tolerancing (GD&T) – Simplified analysis and visual reporting
  • Simultaneous Measurement – Connect multiple devices within the same coordinate system
  • Automated Repeat Inspections – allows jobs to be completed quickly and confidently
  • Remote Measurement – run commands, change scanning modes and see results in real-time

download_pdf

FARO CAM2 SmartInspect Software

FARO CAM2® SmartInspect

The first portable measurement software

FARO CAM2 SmartInspect is the perfect software for any FARO Laser Tracker, Arm and Gage users who are looking for non-CAD based inspection. It can run on Microsoft Windows™ based mobile devices, making it the first portable metrology software.

  • Live, On-Screen 3D View of Measurements – Live graphical view for interactive measurement
  • On-Screen Dimensioning – Users can interact directly with the graphical view
  • Touch-Capable Use – The software runs on Microsoft Windows™ based PCs or Touchpads
  • Mobile Device – Move the device during the measurement process and measure from different positions

download_pdf

BuildIT Software & Solutions

BuildIT Software & Solutions

Your Product, Your Process, Your Solution

BuildIT delivers the industry’s leading 3D software solution for alignment, inspection and build applications in large-volume metrology as well as configurable in-process metrology.

  • Highly configurable and flexible – Streamline your workflows and processes
  • Advanced automation capabilities through user friendly interface with no coding required
  • Powerful GD&T Analysis capabilities for full model-based workflows
  • Hardware Agnostic Interface – Fully compatible with 3rd-party measurement devices
+ CAM2 Measure 10
FARO CAM2 Measure 10 Software

FARO CAM2® Measure 10

Your complete 3D measurement software

FARO CAM2 Measure 10 is a metrology software suite designed for users who are seeking powerful solutions that enable fast and efficient 3D measurement with unbeatable simplicity.

  • Geometric Dimensioning and Tolerancing (GD&T) – Simplified analysis and visual reporting
  • Simultaneous Measurement – Connect multiple devices within the same coordinate system
  • Automated Repeat Inspections – allows jobs to be completed quickly and confidently
  • Remote Measurement – run commands, change scanning modes and see results in real-time

download_pdf

+ CAM2 SmartInspect
FARO CAM2 SmartInspect Software

FARO CAM2® SmartInspect

The first portable measurement software

FARO CAM2 SmartInspect is the perfect software for any FARO Laser Tracker, Arm and Gage users who are looking for non-CAD based inspection. It can run on Microsoft Windows™ based mobile devices, making it the first portable metrology software.

  • Live, On-Screen 3D View of Measurements – Live graphical view for interactive measurement
  • On-Screen Dimensioning – Users can interact directly with the graphical view
  • Touch-Capable Use – The software runs on Microsoft Windows™ based PCs or Touchpads
  • Mobile Device – Move the device during the measurement process and measure from different positions

download_pdf

+ BuildIT
BuildIT Software & Solutions

BuildIT Software & Solutions

Your Product, Your Process, Your Solution

BuildIT delivers the industry’s leading 3D software solution for alignment, inspection and build applications in large-volume metrology as well as configurable in-process metrology.

  • Highly configurable and flexible – Streamline your workflows and processes
  • Advanced automation capabilities through user friendly interface with no coding required
  • Powerful GD&T Analysis capabilities for full model-based workflows
  • Hardware Agnostic Interface – Fully compatible with 3rd-party measurement devices