Don’t expect. Inspect on arrival

Identifying defective parts from suppliers upon arrival allows companies to establish and maintain strict quality standards.

Eliminate scrap and rework

Eliminate scrap and rework

Implementing a comprehensive incoming inspection process prevents defective parts from making it to assembly, eliminating costly scrap and rework later.

By implementing portable CMMs, such as measuring arms and 3D imagers from FARO into the receiving inspection process, operators have a quick and efficient way to determine whether or not these parts meet specifications and design requirements.

Repeatable setup and easy reporting

Repeatable setup and easy reporting

FARO products such as the FaroArm®, ScanArm® or Cobalt Array Imager offer fast product and quality verification measurements that can be repeated continuously for incoming inspection. Measurement reports can be generated that will allow you to notify your suppliers of any deviations quickly.

Application Video: Incoming Inspection

FARO products allow you to conduct faster and more precise inspections to ensure quality of products from your suppliers and to detect out-of-tolerance parts early — before you start investing in further manufacturing and assembly.

+ Capture defects early
Eliminate scrap and rework

Eliminate scrap and rework

Implementing a comprehensive incoming inspection process prevents defective parts from making it to assembly, eliminating costly scrap and rework later.

By implementing portable CMMs, such as measuring arms and 3D imagers from FARO into the receiving inspection process, operators have a quick and efficient way to determine whether or not these parts meet specifications and design requirements.

+ Repeat and report
Repeatable setup and easy reporting

Repeatable setup and easy reporting

FARO products such as the FaroArm®, ScanArm® or Cobalt Array Imager offer fast product and quality verification measurements that can be repeated continuously for incoming inspection. Measurement reports can be generated that will allow you to notify your suppliers of any deviations quickly.

+ Video

Application Video: Incoming Inspection

FARO products allow you to conduct faster and more precise inspections to ensure quality of products from your suppliers and to detect out-of-tolerance parts early — before you start investing in further manufacturing and assembly.

For all your Factory Metrology needs

FaroArm®

The Global Standard for Arm Technology

The FaroArm is an innovative portable coordinate measuring machine that allows manufacturers easy verification of product quality by performing 3D inspections, dimensional analysis, CAD comparison, tool certifications, and more. The Quantum line of FaroArms extends FARO’s tradition of maximum unsurpassed measurement accuracy, consistency and reliability in every working environment.

  • First measuring Arm to be certified against the new and rigorous ISO Standard 10360-12
  • Innovative design with excellent ergonomics and IEC tested for performance and reliability
  • FARO kinematic smart probes for quick probe replacement without the need to recalibrate
  • Robust high-speed wireless operation

download_pdf

FARO Edge

FARO ScanArm®

FARO provides a competitive all-in-one metrology solution with the ScanArm

The FARO ScanArm combines all of the advantages of the FaroArm with a hand held laser scanner (Laser Line Probe) and is the perfect contact/non-contact measurement system. Unlike other scanning systems, the ScanArm’s hard probe and the Laser Line Probe can digitize interchangeably without having to remove either component. Users can accurately measure prismatic features with the hard probe, then laser scan sections requiring larger volumes of data — all in one simple tool.

  • FAROBlu HD LLP laser technology delivers improved scanning results with higher resolution
  • High Dynamic Range Mode and advanced software algorithms to scan challenging materials
  • LED Rangefinder functionality provides real-time scanning feedback

download_pdf

FARO ScanArm

FARO Cobalt Array Imager

Unlimited Multi-Imager Scanning Configurations

The FARO Cobalt Array Imager is a metrology-grade non-contact scanner which captures millions of high-resolution 3D coordinate measurements in seconds. It is equipped with dedicated on-board processors and a smart sensor that allows multi-array configurations.

  • 5MP model – for most applications
  • 9MP model – improves resolution and the ability to capture features on edges and surfaces
  • Interchangeable lens with 250mm and 500mm field of view
  • Accuracy up to 0.027mm for 250mm lens and 0.050mm for 500mm lens

download_pdf

FARO Cobalt Array Imager

FARO Gage

Fast, easy and accurate portable CMM

The FARO Gage measuring arm is an accurate 3D gauge for small parts and is an industry leader in portable CMMs. It is inexpensive, offers high accuracy levels, improves measurement consistency, reduces inspection time and generates automatic reports.

  • 1.2m (4 ft.) spherical working volume – Ideal for small parts, molds and assemblies
  • Accuracy of 0.018mm (0.0007 in.)
  • Temperature & Overload Sensors – Notifications of thermal variations and improper handling
  • Universal 3.5” Quick Mount – Offers ‘mount-it-to-where-you-make-it’ convenience

download_pdf

FARO Gage

FARO Laser Tracker

Advanced, accurate, versatile and portable laser trackers

The FARO VantageS and VantageE Laser Trackers are high-performance, high-value Laser Trackers which maximize productivity and reduce inspection cycle times by up to 75% . These Laser Trackers set the standard in workflow productivity management for large-scale metrology applications by offering mobile device control, exceptional portability, battery operation, ruggedness, and high accuracy.

  • VantageS: 160m (525 ft.) spherical working volume
  • VantageE: 50m (164 ft.) spherical working volume
  • Accuracy up to 0.015mm (0.0006 in.)* [*Typical angle measurement performance at 2m]
  • Hot swappable batteries that eliminate the need for AC power and cabling

download_pdf

FARO Laser Tracker Vantage
+ FaroArm

FaroArm®

The Global Standard for Arm Technology

The FaroArm is an innovative portable coordinate measuring machine that allows manufacturers easy verification of product quality by performing 3D inspections, dimensional analysis, CAD comparison, tool certifications, and more. The Quantum line of FaroArms extends FARO’s tradition of maximum unsurpassed measurement accuracy, consistency and reliability in every working environment.

  • First measuring Arm to be certified against the new and rigorous ISO Standard 10360-12
  • Innovative design with excellent ergonomics and IEC tested for performance and reliability
  • FARO kinematic smart probes for quick probe replacement without the need to recalibrate
  • Robust high-speed wireless operation

download_pdf

FARO Edge
+ ScanArm

FARO ScanArm®

FARO provides a competitive all-in-one metrology solution with the ScanArm

The FARO ScanArm combines all of the advantages of the FaroArm with a hand held laser scanner (Laser Line Probe) and is the perfect contact/non-contact measurement system. Unlike other scanning systems, the ScanArm’s hard probe and the Laser Line Probe can digitize interchangeably without having to remove either component. Users can accurately measure prismatic features with the hard probe, then laser scan sections requiring larger volumes of data — all in one simple tool.

  • FAROBlu HD LLP laser technology delivers improved scanning results with higher resolution
  • High Dynamic Range Mode and advanced software algorithms to scan challenging materials
  • LED Rangefinder functionality provides real-time scanning feedback

download_pdf

FARO ScanArm
+ Cobalt

FARO Cobalt Array Imager

Unlimited Multi-Imager Scanning Configurations

The FARO Cobalt Array Imager is a metrology-grade non-contact scanner which captures millions of high-resolution 3D coordinate measurements in seconds. It is equipped with dedicated on-board processors and a smart sensor that allows multi-array configurations.

  • 5MP model – for most applications
  • 9MP model – improves resolution and the ability to capture features on edges and surfaces
  • Interchangeable lens with 250mm and 500mm field of view
  • Accuracy up to 0.027mm for 250mm lens and 0.050mm for 500mm lens

download_pdf

FARO Cobalt Array Imager
+ Gage

FARO Gage

Fast, easy and accurate portable CMM

The FARO Gage measuring arm is an accurate 3D gauge for small parts and is an industry leader in portable CMMs. It is inexpensive, offers high accuracy levels, improves measurement consistency, reduces inspection time and generates automatic reports.

  • 1.2m (4 ft.) spherical working volume – Ideal for small parts, molds and assemblies
  • Accuracy of 0.018mm (0.0007 in.)
  • Temperature & Overload Sensors – Notifications of thermal variations and improper handling
  • Universal 3.5” Quick Mount – Offers ‘mount-it-to-where-you-make-it’ convenience

download_pdf

FARO Gage
+ Laser Tracker

FARO Laser Tracker

Advanced, accurate, versatile and portable laser trackers

The FARO VantageS and VantageE Laser Trackers are high-performance, high-value Laser Trackers which maximize productivity and reduce inspection cycle times by up to 75% . These Laser Trackers set the standard in workflow productivity management for large-scale metrology applications by offering mobile device control, exceptional portability, battery operation, ruggedness, and high accuracy.

  • VantageS: 160m (525 ft.) spherical working volume
  • VantageE: 50m (164 ft.) spherical working volume
  • Accuracy up to 0.015mm (0.0006 in.)* [*Typical angle measurement performance at 2m]
  • Hot swappable batteries that eliminate the need for AC power and cabling

download_pdf

FARO Laser Tracker Vantage
FARO CAM2 Measure 10 Software

FARO CAM2® Measure 10

Your complete 3D measurement software

FARO CAM2 Measure 10 is a metrology software suite designed for users who are seeking powerful solutions that enable fast and efficient 3D measurement with unbeatable simplicity.

  • Geometric Dimensioning and Tolerancing (GD&T) – Simplified analysis and visual reporting
  • Simultaneous Measurement – Connect multiple devices within the same coordinate system
  • Automated Repeat Inspections – allows jobs to be completed quickly and confidently
  • Remote Measurement – run commands, change scanning modes and see results in real-time

download_pdf

FARO CAM2 SmartInspect Software

FARO CAM2® SmartInspect

The first portable measurement software

FARO CAM2 SmartInspect is the perfect software for any FARO Laser Tracker, Arm and Gage users who are looking for non-CAD based inspection. It can run on Microsoft Windows™ based mobile devices, making it the first portable metrology software.

  • Live, On-Screen 3D View of Measurements – Live graphical view for interactive measurement
  • On-Screen Dimensioning – Users can interact directly with the graphical view
  • Touch-Capable Use – The software runs on Microsoft Windows™ based PCs or Touchpads
  • Mobile Device – Move the device during the measurement process and measure from different positions

download_pdf

BuildIT Software & Solutions

BuildIT Software & Solutions

Your Product, Your Process, Your Solution

BuildIT delivers the industry’s leading 3D software solution for alignment, inspection and build applications in large-volume metrology as well as configurable in-process metrology.

  • Highly configurable and flexible – Streamline your workflows and processes
  • Advanced automation capabilities through user friendly interface with no coding required
  • Powerful GD&T Analysis capabilities for full model-based workflows
  • Hardware Agnostic Interface – Fully compatible with 3rd-party measurement devices
+ CAM2 Measure 10
FARO CAM2 Measure 10 Software

FARO CAM2® Measure 10

Your complete 3D measurement software

FARO CAM2 Measure 10 is a metrology software suite designed for users who are seeking powerful solutions that enable fast and efficient 3D measurement with unbeatable simplicity.

  • Geometric Dimensioning and Tolerancing (GD&T) – Simplified analysis and visual reporting
  • Simultaneous Measurement – Connect multiple devices within the same coordinate system
  • Automated Repeat Inspections – allows jobs to be completed quickly and confidently
  • Remote Measurement – run commands, change scanning modes and see results in real-time

download_pdf

+ CAM2 SmartInspect
FARO CAM2 SmartInspect Software

FARO CAM2® SmartInspect

The first portable measurement software

FARO CAM2 SmartInspect is the perfect software for any FARO Laser Tracker, Arm and Gage users who are looking for non-CAD based inspection. It can run on Microsoft Windows™ based mobile devices, making it the first portable metrology software.

  • Live, On-Screen 3D View of Measurements – Live graphical view for interactive measurement
  • On-Screen Dimensioning – Users can interact directly with the graphical view
  • Touch-Capable Use – The software runs on Microsoft Windows™ based PCs or Touchpads
  • Mobile Device – Move the device during the measurement process and measure from different positions

download_pdf

+ BuildIT
BuildIT Software & Solutions

BuildIT Software & Solutions

Your Product, Your Process, Your Solution

BuildIT delivers the industry’s leading 3D software solution for alignment, inspection and build applications in large-volume metrology as well as configurable in-process metrology.

  • Highly configurable and flexible – Streamline your workflows and processes
  • Advanced automation capabilities through user friendly interface with no coding required
  • Powerful GD&T Analysis capabilities for full model-based workflows
  • Hardware Agnostic Interface – Fully compatible with 3rd-party measurement devices