Properly aligned machines… consistent parts

Misalignments can lead to machine downtime and significantly decrease machine performance; however, portable CMMs such as laser trackers and measuring arms can help to mitigate these issues.

Accuracy and consistency

Accuracy and consistency

The FARO® Laser Tracker is ideal for many tasks such as machine tool alignment, roller and press alignment, jig and fixture alignment or CMM alignment. Machines that are out of tolerance produce defective parts and are subject to failure. This accurate and fast method reduces downtime, improves quality and generates a proper trend analysis of distortion and other changes in a machine’s operation.

Produce consistent parts

Produce consistent parts

For smaller scale tasks, such as on-machine alignment, portable CMMs, such as the FaroArm are an ideal solution to complement the laser tracker work.

Application Video: Alignment

Alignment can be accomplished easily by measuring with the FARO Laser Tracker. The Laser Tracker improves quality and generates a trend analysis of distortion and other changes in a machine’s operation.

+ Large machines
Accuracy and consistency

Accuracy and consistency

The FARO® Laser Tracker is ideal for many tasks such as machine tool alignment, roller and press alignment, jig and fixture alignment or CMM alignment. Machines that are out of tolerance produce defective parts and are subject to failure. This accurate and fast method reduces downtime, improves quality and generates a proper trend analysis of distortion and other changes in a machine’s operation.

+ Small machines
Produce consistent parts

Produce consistent parts

For smaller scale tasks, such as on-machine alignment, portable CMMs, such as the FaroArm are an ideal solution to complement the laser tracker work.

+ Video

Application Video: Alignment

Alignment can be accomplished easily by measuring with the FARO Laser Tracker. The Laser Tracker improves quality and generates a trend analysis of distortion and other changes in a machine’s operation.

For all your Factory Metrology needs

FARO Laser Tracker

Advanced, accurate, versatile and portable laser trackers

The FARO VantageS and VantageE Laser Trackers are high-performance, high-value Laser Trackers which maximize productivity and reduce inspection cycle times by up to 75% . These Laser Trackers set the standard in workflow productivity management for large-scale metrology applications by offering mobile device control, exceptional portability, battery operation, ruggedness, and high accuracy.

  • VantageS: 160m (525 ft.) spherical working volume
  • VantageE: 50m (164 ft.) spherical working volume
  • Accuracy up to 0.015mm (0.0006 in.)* [*Typical angle measurement performance at 2m]
  • Hot swappable batteries that eliminate the need for AC power and cabling
download_pdf
FARO Laser Tracker Vantage

FaroArm®

FARO offers the world’s best-selling measurement arm

The FaroArm is a portable CMM that allows manufacturers easy verification of product quality by performing 3D inspections, tool certifications, CAD comparison, dimensional analysis and more. The FARO Edge is the most advanced, state-of-the-art FaroArm ever produced.

  • 1.8m to 3.7m (6 ft. to 12 ft.) spherical working volume
  • Repeatability from 0.024mm (0.0009 in.) to 0.064mm (0.0025in.)
  • Built-in touchscreen computer for laptop-free basic measurements
  • Smart Sensor Technology – Warn against excessive loads, correct for thermal variations, detect setup problems

download_pdf

FARO Edge
+ Laser Tracker

FARO Laser Tracker

Advanced, accurate, versatile and portable laser trackers

The FARO VantageS and VantageE Laser Trackers are high-performance, high-value Laser Trackers which maximize productivity and reduce inspection cycle times by up to 75% . These Laser Trackers set the standard in workflow productivity management for large-scale metrology applications by offering mobile device control, exceptional portability, battery operation, ruggedness, and high accuracy.

  • VantageS: 160m (525 ft.) spherical working volume
  • VantageE: 50m (164 ft.) spherical working volume
  • Accuracy up to 0.015mm (0.0006 in.)* [*Typical angle measurement performance at 2m]
  • Hot swappable batteries that eliminate the need for AC power and cabling
download_pdf
FARO Laser Tracker Vantage
+ FaroArm

FaroArm®

FARO offers the world’s best-selling measurement arm

The FaroArm is a portable CMM that allows manufacturers easy verification of product quality by performing 3D inspections, tool certifications, CAD comparison, dimensional analysis and more. The FARO Edge is the most advanced, state-of-the-art FaroArm ever produced.

  • 1.8m to 3.7m (6 ft. to 12 ft.) spherical working volume
  • Repeatability from 0.024mm (0.0009 in.) to 0.064mm (0.0025in.)
  • Built-in touchscreen computer for laptop-free basic measurements
  • Smart Sensor Technology – Warn against excessive loads, correct for thermal variations, detect setup problems

download_pdf

FARO Edge
FARO CAM2 Measure 10 Software

FARO CAM2® Measure 10

Your complete 3D measurement software

FARO CAM2 Measure 10 is a metrology software suite designed for users who are seeking powerful solutions that enable fast and efficient 3D measurement with unbeatable simplicity.

  • Geometric Dimensioning and Tolerancing (GD&T) – Simplified analysis and visual reporting
  • Simultaneous Measurement – Connect multiple devices within the same coordinate system
  • Automated Repeat Inspections – allows jobs to be completed quickly and confidently
  • Remote Measurement – run commands, change scanning modes and see results in real-time

download_pdf

FARO CAM2 SmartInspect Software

FARO CAM2® SmartInspect

The first portable measurement software

FARO CAM2 SmartInspect is the perfect software for any FARO Laser Tracker, Arm and Gage users who are looking for non-CAD based inspection. It can run on Microsoft Windows™ based mobile devices, making it the first portable metrology software.

  • Live, On-Screen 3D View of Measurements – Live graphical view for interactive measurement
  • On-Screen Dimensioning – Users can interact directly with the graphical view
  • Touch-Capable Use – The software runs on Microsoft Windows™ based PCs or Touchpads
  • Mobile Device – Move the device during the measurement process and measure from different positions

download_pdf

BuildIT Software & Solutions

BuildIT Software & Solutions

Your Product, Your Process, Your Solution

BuildIT delivers the industry’s leading 3D software solution for alignment, inspection and build applications in large-volume metrology as well as configurable in-process metrology.

  • Highly configurable and flexible – Streamline your workflows and processes
  • Advanced automation capabilities through user friendly interface with no coding required
  • Powerful GD&T Analysis capabilities for full model-based workflows
  • Hardware Agnostic Interface – Fully compatible with 3rd-party measurement devices
+ CAM2 Measure 10
FARO CAM2 Measure 10 Software

FARO CAM2® Measure 10

Your complete 3D measurement software

FARO CAM2 Measure 10 is a metrology software suite designed for users who are seeking powerful solutions that enable fast and efficient 3D measurement with unbeatable simplicity.

  • Geometric Dimensioning and Tolerancing (GD&T) – Simplified analysis and visual reporting
  • Simultaneous Measurement – Connect multiple devices within the same coordinate system
  • Automated Repeat Inspections – allows jobs to be completed quickly and confidently
  • Remote Measurement – run commands, change scanning modes and see results in real-time

download_pdf

+ CAM2 SmartInspect
FARO CAM2 SmartInspect Software

FARO CAM2® SmartInspect

The first portable measurement software

FARO CAM2 SmartInspect is the perfect software for any FARO Laser Tracker, Arm and Gage users who are looking for non-CAD based inspection. It can run on Microsoft Windows™ based mobile devices, making it the first portable metrology software.

  • Live, On-Screen 3D View of Measurements – Live graphical view for interactive measurement
  • On-Screen Dimensioning – Users can interact directly with the graphical view
  • Touch-Capable Use – The software runs on Microsoft Windows™ based PCs or Touchpads
  • Mobile Device – Move the device during the measurement process and measure from different positions

download_pdf

+ BuildIT
BuildIT Software & Solutions

BuildIT Software & Solutions

Your Product, Your Process, Your Solution

BuildIT delivers the industry’s leading 3D software solution for alignment, inspection and build applications in large-volume metrology as well as configurable in-process metrology.

  • Highly configurable and flexible – Streamline your workflows and processes
  • Advanced automation capabilities through user friendly interface with no coding required
  • Powerful GD&T Analysis capabilities for full model-based workflows
  • Hardware Agnostic Interface – Fully compatible with 3rd-party measurement devices