Calibrate machines for in-spec parts

FARO’s portable 3D measurement solutions like the FARO Laser Tracker and FaroArm can be used in the calibration of machines in manufacturing to ensure accuracy of parts produced by the machines.

Good parts and reduced downtime

Good parts and reduced downtime

Out-of-tolerance parts are often the result of a poorly calibrated machine. With properly calibrated machines, part production is optimized and downtime reduced. Properly calibrated machines produce conforming parts and allow you to minimize the costs of scrap and rework.

Short setup time to identify errors

Short setup time to identify errors

Quick checks of machine calibration using portable CMMs from FARO, allow operators to perform full volumetric accuracy tests with minimal setup time and to quickly identify calibration errors.

Industries such as automotive, aerospace and shipbuilding have adopted 3D portable metrology solutions from FARO for re-calibration of machines, tools, molds, dies, jigs and templates.

Application Video: Machine Calibration

FARO’s portable 3D measurement solutions allow quick, flexible and accurate calibration of machines in production which helps reduce downtime and ensures that part production is optimized and effective.

+ Calibrate to be accurate
Good parts and reduced downtime

Good parts and reduced downtime

Out-of-tolerance parts are often the result of a poorly calibrated machine. With properly calibrated machines, part production is optimized and downtime reduced. Properly calibrated machines produce conforming parts and allow you to minimize the costs of scrap and rework.

+ Quick and easy
Short setup time to identify errors

Short setup time to identify errors

Quick checks of machine calibration using portable CMMs from FARO, allow operators to perform full volumetric accuracy tests with minimal setup time and to quickly identify calibration errors.

Industries such as automotive, aerospace and shipbuilding have adopted 3D portable metrology solutions from FARO for re-calibration of machines, tools, molds, dies, jigs and templates.

+ Video

Application Video: Machine Calibration

FARO’s portable 3D measurement solutions allow quick, flexible and accurate calibration of machines in production which helps reduce downtime and ensures that part production is optimized and effective.

For all your Factory Metrology needs

FaroArm®

FARO offers the world’s best-selling measurement arm

The FaroArm is a portable CMM that allows manufacturers easy verification of product quality by performing 3D inspections, tool certifications, CAD comparison, dimensional analysis and more. The FARO Edge is the most advanced, state-of-the-art FaroArm ever produced.

  • 1.8m to 3.7m (6 ft. to 12 ft.) spherical working volume
  • Repeatability from 0.024mm (0.0009 in.) to 0.064mm (0.0025in.)
  • Built-in touchscreen computer for laptop-free basic measurements
  • Smart Sensor Technology – Warn against excessive loads, correct for thermal variations, detect setup problems

download_pdf

FARO Edge

FARO ScanArm®

FARO provides a competitive all-in-one metrology solution with the ScanArm

The FARO ScanArm combines all of the advantages of the FaroArm with a hand held laser scanner (Laser Line Probe) and is the perfect contact/non-contact measurement system. Unlike other scanning systems, the ScanArm’s hard probe and the Laser Line Probe can digitize interchangeably without having to remove either component. Users can accurately measure prismatic features with the hard probe, then laser scan sections requiring larger volumes of data — all in one simple tool.

  • Scan rate – 280 frames/sec, 280fps x 2,000 points/line = 560,000 points/sec
  • High Dynamic Range Mode and advanced software algorithms to scan challenging materials
  • LED Rangefinder functionality which provides real-time scanning feedback
  • Blue laser technology delivers improved scanning results with higher resolution

download_pdf

FARO ScanArm

FARO Laser Tracker

Advanced, accurate, and versatile laser trackers

The FARO Vantage and VantageE Laser Trackers are extremely accurate, portable coordinate measuring machines that are used for the measurement and verification of large and medium sized parts and assemblies. They enable you to build products, optimize processes, and deliver solutions by measuring quickly, simply and precisely.

  • Vantage: 160m (525 ft.) spherical working volume
  • VantageE: 50m (164 ft.) spherical working volume
  • Accuracy up to 0.015mm (0.0006 in.)* [*Typical angle measurement performance at 2m]
  • Patented Super 6DoF (Degrees of Freedom) TrackArm solution with Faro ScanArm possible

download_pdf

FARO Laser Tracker Vantage

FARO Cobalt Array Imager

Unlimited Multi-Imager Scanning Configurations

The FARO Cobalt Array Imager is a metrology-grade non-contact scanner which captures millions of high-resolution 3D coordinate measurements in seconds. It is equipped with dedicated on-board processors and a smart sensor that allows multi-array configurations.

  • 5MP model – for most applications
  • 9MP model – improves resolution and the ability to capture features on edges and surfaces
  • Interchangeable lens with 250mm and 500mm field of view
  • Accuracy up to 0.027mm for 250mm lens and 0.050mm for 500mm lens

download_pdf

FARO Cobalt Array Imager

FARO Gage

Fast, easy and accurate portable CMM

The FARO Gage measuring arm is an accurate 3D gauge for small parts and is an industry leader in portable CMMs. It is inexpensive, offers high accuracy levels, improves measurement consistency, reduces inspection time and generates automatic reports.

  • 1.2m (4 ft.) spherical working volume – Ideal for small parts, molds and assemblies
  • Accuracy of 0.018mm (0.0007 in.)
  • Temperature & Overload Sensors – Notifications of thermal variations and improper handling
  • Universal 3.5” Quick Mount – Offers ‘mount-it-to-where-you-make-it’ convenience

download_pdf

FARO Gage
+ FaroArm

FaroArm®

FARO offers the world’s best-selling measurement arm

The FaroArm is a portable CMM that allows manufacturers easy verification of product quality by performing 3D inspections, tool certifications, CAD comparison, dimensional analysis and more. The FARO Edge is the most advanced, state-of-the-art FaroArm ever produced.

  • 1.8m to 3.7m (6 ft. to 12 ft.) spherical working volume
  • Repeatability from 0.024mm (0.0009 in.) to 0.064mm (0.0025in.)
  • Built-in touchscreen computer for laptop-free basic measurements
  • Smart Sensor Technology – Warn against excessive loads, correct for thermal variations, detect setup problems

download_pdf

FARO Edge
+ ScanArm

FARO ScanArm®

FARO provides a competitive all-in-one metrology solution with the ScanArm

The FARO ScanArm combines all of the advantages of the FaroArm with a hand held laser scanner (Laser Line Probe) and is the perfect contact/non-contact measurement system. Unlike other scanning systems, the ScanArm’s hard probe and the Laser Line Probe can digitize interchangeably without having to remove either component. Users can accurately measure prismatic features with the hard probe, then laser scan sections requiring larger volumes of data — all in one simple tool.

  • Scan rate – 280 frames/sec, 280fps x 2,000 points/line = 560,000 points/sec
  • High Dynamic Range Mode and advanced software algorithms to scan challenging materials
  • LED Rangefinder functionality which provides real-time scanning feedback
  • Blue laser technology delivers improved scanning results with higher resolution

download_pdf

FARO ScanArm
+ Laser Tracker

FARO Laser Tracker

Advanced, accurate, and versatile laser trackers

The FARO Vantage and VantageE Laser Trackers are extremely accurate, portable coordinate measuring machines that are used for the measurement and verification of large and medium sized parts and assemblies. They enable you to build products, optimize processes, and deliver solutions by measuring quickly, simply and precisely.

  • Vantage: 160m (525 ft.) spherical working volume
  • VantageE: 50m (164 ft.) spherical working volume
  • Accuracy up to 0.015mm (0.0006 in.)* [*Typical angle measurement performance at 2m]
  • Patented Super 6DoF (Degrees of Freedom) TrackArm solution with Faro ScanArm possible

download_pdf

FARO Laser Tracker Vantage
+ Cobalt

FARO Cobalt Array Imager

Unlimited Multi-Imager Scanning Configurations

The FARO Cobalt Array Imager is a metrology-grade non-contact scanner which captures millions of high-resolution 3D coordinate measurements in seconds. It is equipped with dedicated on-board processors and a smart sensor that allows multi-array configurations.

  • 5MP model – for most applications
  • 9MP model – improves resolution and the ability to capture features on edges and surfaces
  • Interchangeable lens with 250mm and 500mm field of view
  • Accuracy up to 0.027mm for 250mm lens and 0.050mm for 500mm lens

download_pdf

FARO Cobalt Array Imager
+ Gage

FARO Gage

Fast, easy and accurate portable CMM

The FARO Gage measuring arm is an accurate 3D gauge for small parts and is an industry leader in portable CMMs. It is inexpensive, offers high accuracy levels, improves measurement consistency, reduces inspection time and generates automatic reports.

  • 1.2m (4 ft.) spherical working volume – Ideal for small parts, molds and assemblies
  • Accuracy of 0.018mm (0.0007 in.)
  • Temperature & Overload Sensors – Notifications of thermal variations and improper handling
  • Universal 3.5” Quick Mount – Offers ‘mount-it-to-where-you-make-it’ convenience

download_pdf

FARO Gage
FARO CAM2 Measure 10 Software

FARO CAM2® Measure 10

Your complete 3D measurement software

FARO CAM2 Measure 10 is a metrology software suite designed for users who are seeking powerful solutions that enable fast and efficient 3D measurement with unbeatable simplicity.

  • Geometric Dimensioning and Tolerancing (GD&T) – Simplified analysis and visual reporting
  • Simultaneous Measurement – Connect multiple devices within the same coordinate system
  • Automated Repeat Inspections – allows jobs to be completed quickly and confidently
  • Remote Measurement – run commands, change scanning modes and see results in real-time

download_pdf

FARO CAM2 SmartInspect Software

FARO CAM2® SmartInspect

The first portable measurement software

FARO CAM2 SmartInspect is the perfect software for any FARO Laser Tracker, Arm and Gage users who are looking for non-CAD based inspection. It can run on Microsoft Windows™ based mobile devices, making it the first portable metrology software.

  • Live, On-Screen 3D View of Measurements – Live graphical view for interactive measurement
  • On-Screen Dimensioning – Users can interact directly with the graphical view
  • Touch-Capable Use – The software runs on Microsoft Windows™ based PCs or Touchpads
  • Mobile Device – Move the device during the measurement process and measure from different positions

download_pdf

BuildIT Software & Solutions

BuildIT Software & Solutions

Your Product, Your Process, Your Solution

BuildIT delivers the industry’s leading 3D software solution for alignment, inspection and build applications in large-volume metrology as well as configurable in-process metrology.

  • Highly configurable and flexible – Streamline your workflows and processes
  • Advanced automation capabilities through user friendly interface with no coding required
  • Powerful GD&T Analysis capabilities for full model-based workflows
  • Hardware Agnostic Interface – Fully compatible with 3rd-party measurement devices

+ CAM2 Measure 10
FARO CAM2 Measure 10 Software

FARO CAM2® Measure 10

Your complete 3D measurement software

FARO CAM2 Measure 10 is a metrology software suite designed for users who are seeking powerful solutions that enable fast and efficient 3D measurement with unbeatable simplicity.

  • Geometric Dimensioning and Tolerancing (GD&T) – Simplified analysis and visual reporting
  • Simultaneous Measurement – Connect multiple devices within the same coordinate system
  • Automated Repeat Inspections – allows jobs to be completed quickly and confidently
  • Remote Measurement – run commands, change scanning modes and see results in real-time

download_pdf

+ CAM2 SmartInspect
FARO CAM2 SmartInspect Software

FARO CAM2® SmartInspect

The first portable measurement software

FARO CAM2 SmartInspect is the perfect software for any FARO Laser Tracker, Arm and Gage users who are looking for non-CAD based inspection. It can run on Microsoft Windows™ based mobile devices, making it the first portable metrology software.

  • Live, On-Screen 3D View of Measurements – Live graphical view for interactive measurement
  • On-Screen Dimensioning – Users can interact directly with the graphical view
  • Touch-Capable Use – The software runs on Microsoft Windows™ based PCs or Touchpads
  • Mobile Device – Move the device during the measurement process and measure from different positions

download_pdf

+ BuildIT
BuildIT Software & Solutions

BuildIT Software & Solutions

Your Product, Your Process, Your Solution

BuildIT delivers the industry’s leading 3D software solution for alignment, inspection and build applications in large-volume metrology as well as configurable in-process metrology.

  • Highly configurable and flexible – Streamline your workflows and processes
  • Advanced automation capabilities through user friendly interface with no coding required
  • Powerful GD&T Analysis capabilities for full model-based workflows
  • Hardware Agnostic Interface – Fully compatible with 3rd-party measurement devices